On October 23,2019 a fire ignited in Northern California.
The location was next to John Kincade Road
. southeast of the town of Cloverdale
in Sonoma county.
A place that I am very familiar. It’s where I grew up and called home for many years.. Spending about 35 years in Sonoma county(home of the Bohemian Grove
) , there are few places within the county I haven’t left my footprint. That would include The Geysers geothermal field
located in California’s Mayacamas Mountains which John Kincade Road passes through. The birth of the Kincade Fire.
Cal fire reports fire starting at 9:27 pm.. If you do a Google search you will find the media reporting start times at 9:24 pn and 9:27 pm. When the fire was called in, we are told the caller reported a power line was down. The caller or the report of the power line being down has not been confirmed. Unconfirmed or not , the media still reports it as if it were factual evidence. The media is also leading people to believe it was at a location of a PG & E high power transmission tower PG &E claims that one of its lines e failed at exactly 9:20 pm. Four or seven minutes (depending which media organization is reporting it) before the fire started. Here is a photo of the tower and the location. Image 1A
There is a video that is being circulated that shows the exact time and location the fire started. The various media organizations claim this video proves where, how, why and when the fire started. They insinuate the power line broke on the transmission line tower, shut the light off at powerplant building (seen in the photo) and that the broken power line started the fire 4 minutes or 7 minutes later, at that very location. I’m going to use that video and show you that the fire started at/or before their 4 minute or 7 minute claim. I’ll also show you that the fire ignited at a different location. Vindicating PG & E for being the cause of this fire.
The video they/we are using was filmed from around 20 to 21 miles away. The camera was located on a tower in Santa Rosa. It’s part of a network of cameras placed throughout California set up to spot fires. The Image 2A is a nightshot of the location of the transmission tower from 20 miles away. The bright light is the location of the building by the transmission tower. On the right in the image there is a map. The yellow triangle at the bottom is the camera’s location and the yellow balloon is where the light is located at. This is the camera that captured the frames in the video.
The video is a time lapse video. It’s presented at a higher speed. When played at the speed presented, it appears that the light went out and the fire started at the same location. I’ve provided the video below.
The video can be deceiving when only viewed at the higher speed. What I did was slow the video down, closer to actual time, to get a better understanding of the actual time the fire bwecame visable. I managed to capture four frames back to back. One frame was at 21:19:51(the last time the light was on). Next frame was at 21:19:55(no light, no fire visable). Next frame was at 21:20:09(first time fire becomes visable but difficult to see so I tossed it). Final frame is at 21:20:13(when the fire becomes clearly visable).
Keeping three frames I stacked them frame by frame so that you can see all three events occurred within a 18 second time period. Image 3A The bottom frame is when the fire becomes visable. The middle frame(red box) shows the time between the light being visable and the fire being visable. The top frame show the last time the light was visable. Notice the times. The fire becomes visable within 18 seconds after the light shut off. Proving the fire started long before 9:24 pm or 9:27 pm. There was no 4 or 7 minutes later. Also, notice the locations of the light and the fire. Two different locations. Remember, this is being filmed from 20 miles away. The fire and light appear close together. As you get closer to the event, the distance between the two locations is far greater.
In the next image I took 1/2 of the first frame and 1/2 the last frame and matched them together to show the 2 different locations. Image 4A
The video and images clearly show that the fire started at a different loication and long beforew the 4 or 7 minutes. So where was the ignition point? Taking the informatioin I had available, I did the following. I knew the distance from the camera was around 20 to 21 miles away. The angle was about 2 degrees difference between the fire and the light. I used the method in Image 5A and came up with the results in Image 6A.
In Image 6A the red ballon is the location of the powereplant building with the light that shut off and the transmission tower that supposedly started the fire. My results led me to believe fire started in the area circled in green. My location is pretty close to the location Cal Fire post as being the ignition point of the fire as seen in Image 7A( Cal Fire, red ballon. The blue circle is location the media is pushing).
Something I should also mention is that the fire became visable from 20 miles away within 18 seconds. The fire had to have been burning a lot longer than 18 seconds to be visable at that distance. The only other way to get a fire to flash that quickly is by using an accelerant. In the case of an accelerant, there would have been a huge flash when the fire was ignited. Exactly what a witness in this next video mentioned.
Additional talking points
The media is focused on that single location as being to ignition point. Why don’t they put some attention on the owner of the powerplant building where the light shut off? The owner is Calpine. Calpine ownes the majority of the powerplants at The Geysers. They claim to have shut their facilities down due to high winds. Why? Winds have zero effect on geothermal plants. PG & E owns all the high power transmission lines. Wind would have no impact on the powerplant. Also, the powerplants generate their own power. PG &E high power transmission line failing would not shut the lights off at the power plant. Even if it was connected to the plant. Powerplants provide electricity to PG &E, not the opposite way around.. Any line failure of PG &E would never shut the power off at the powerplant.
Calpine is owned by Energy Capital Partrners(ECP). ECP has owned assets in every major power market in the USA. Their portfolio can be viewed here.
It’ was fairly easy to eliminate the transmission tower as being the cause of the fire. Why doesn’t Cal Fire speak up?
Cal Fire resources .
“CAL FIRE owns and operates over 3,000 fire and emergency response and resource protection vehicles. In support of its ground forces, the CAL FIRE emergency response air program includes 23 Grumman S-2T 1,200 gallon airtankers, 11 UH-1H Super Huey helicopters, and 14 OV-10A airtactical. From 13 air attack and nine helitack bases located statewide, aircraft can reach most fires within 20 minutes”.
In addition I found the following. They have 61 dozers, 50 fixed wing and rotary wing aircraft which include , 2 Air King A200 and 1 or more of the following, Dornier Do-228, C-23A Sherpa (SD3-30), Air Tractor AT-802A “FireBoss” , Grumman S-2T, Lockheed P-2 Neptune, CL-215/ Bombardier 415 “Superscooper”, Douglas DC-7,McDonnell Douglas MD-87, British Aerospace Bae 146/ Avro RJ85, L188 Electra, Lockheed C-130 Hercules, Boeing 747, DC-10, AH-1 Firewatch “Cobra” ,Sikorsky S-61, Sikorsky S-64, Sikorsky S -70 “Firehawk”,Eurocopter AS-332L, Boeing-Vertol BV 107, Boeing 234 “Chinook”, Kaman “K-Max”, Bell 212, Bell 205 A++, Bell 412, Bell 407, Bell 206B “JetRanger”, Bell 206L-III “LongRanger”, Eurocopter AS350 AStar, MD 500D, Aérospatiale SA 315B “Lama”, Alouette 316B, Lockheed C-130, UH -60 “Blackhawk”, Boeing CH-46 “Sea Knight”, CH -47 “Chinook”, Sikorsky CH-53E “Super Stallion” (Sikorsky S-80E). For details click here.
Cal Fire’s budget is up to 2.6 billion dollars.
Besides wondering why Cal Fire has all the military class aircraft that we never see, I have to ask ” with all the money spent on Cal Fire and the inventory of helicopters and dozers that they own, why did the decide to contract out for fire suppression instead of using their own inventory?” Cal Fire didn’t use any of their dozers or helicopters for the kincade fire,
California has become a “hustling ground” for the state leadership(Democrats). Clearly it looks as if they are using Cal Fire and fire disasters to scame money out of Californians as well as tax payers throughout the USA. The residents in California end up suffering the most. Cal Fire knows exactly what caused the Kincade fire. Democrats have made it clear that they want to control/ownership the power supply in California. Cal Fire’s silence only helps them attain that goal. Cal Fire’s leadership is a joke. Back in the day we used to have smoke jumpers that would have shut this fire down. Where are they? More time was spent talking about, watching the fire then was spent on fighting it. Totally disgusting. Having some experience fighting forest fires I understand it’s difficult work so I commend those that actually fought the fire. My appreciation goes out to you.
I am in no way a fan of PG &E. I am far less a fan of the democrat leadership. It would be nice to see a little bit of integrity coming from their way. I don’t believe for one second that PG &E is responsible for the Kincade fire. PG &E had shut the power down at 5:00 pm earlier that day. The light we saw in the video had to be running on the powerplants own electricity. Also, the high power transmission lines are built to handle winds up to 145 mph. Another thing that never gets mentioned is that there are other companies that have power lines in the same area.
PG &E initiated its power shut offs were more than likely done because high winds automatically shut down their wind generators thoughout the state. It wasn’t fire they were worried about. They were worried about not being able to supply the power needed.
The high winds have zero to do with climate change, If a person wants to know what causes the weather all they would need to do is see who was flying “weather modification” missions earlier that week. That’s the cause of California droughts and all the dead trees through out California. That’s why we have man made aluminum dust covering a large part of the state.
My last to thoughts today are “Never believe anything that comes out of the mouth of a California politician or State official, at any level. They are always lying to you” and “The fire evacuations during the Kincade fire were not done to save people. They were done because they didn’t want you to see what they were doing.” Even if you saw something…….
More than 100 of the approximately 430 cell sites in Sonoma County were knocked out of service because of a loss of power Monday, the peak day for cellphone network outages during the 11-day period since the Kincade fire erupted on Oct. 23, according to Federal Communications Commission records.
To see in more detail how Gavin Newsome waste tax payer dollars, click here.
Happy New Year
Please follow and like us: